URL Listing

Use the URL Listing dialog to create a URL List for the specified master. The URL List identifies all NetLinx devices present in the same System as the Master that you are connected to (FIG. 285).

FIG. 285 URL Listing dialog

You must enter a URL for each device in the System before you can use ID Mode on other devices.

NOTE: Only devices def ined in the URL list will appear in the Online Tree (with the exception of the Master to which you are connected).

Creating a URL List

1. Select Diagnostics > URL Listing to access the URL Listing dialog.
2. Enter the System and Device numbers for the Master that you are connected to in the appropriate text boxes. The range is 0- 65535.
3. To add a device to the URL List, click Add. This opens the Add URL dialog (FIG. 286).

FIG. 286 Add URL dialog (indicating a sample URL to add)

1. Enter the web address (URL or IP Address) of the device in the URL field and click OK to return to the URL List dialog.

NOTE: If you enter a valid URL for a device, the program generates the device's IP Address.

1. Initially the connection status reads Looking up IP. Once found, the new device appears in the URL List (FIG. 287).

FIG. 287 URL Listing dialog - Looking Up URL and Connected

1. Click Get URL List to refresh the URL List after adding a device.
2. Repeat steps 1-5 for as many additional devices as are required.
   • To retrieve a list of all URLs in the list, click Get URL List. The URL List is populated with all previously set URLs.
   • To remove a URL from the list, select the URL and click Remove.
   • To clear all URLs from the list, click Remove All.