Receiving a Panel File From a NetLinx Master

Use the Transfer > Receive From Panel option (or click the toolbar button) to connect to a Master and upload a panel file from a compatible G5 touch panel on that Master's bus.

1. Select Transfer > Receive From Panel.

If you are not already connected to the Master, the Connect dialog is invoked.

• 1. Select the appropriate connection configuration from the Connection drop-down list and
  2. Click Connect to establish the connection.

• Once communication is established, select Transfer > Receive from Panel. This opens the Receive from Panel dialog (FIG. 419):

FIG. 419 Receive From Panel dialog

1. Select one or more target panels to include in the transfer.

2. Under Options, select transfer options as desired:

3. Normal transfer (panel f iles only): This option receives only panel files from the source panel.

4. Full transfer (all f iles in panel directory): Select this option to receive all project files from the source panel.
5. Clear from status queue when complete: This option (enabled by default) clears each transfer from the Transfer Status window when complete.

6. Open received panel: Select this option to automatically open the panel file once it is received.

7. Click Receive.

8. Select a target directory for the received files in the Receive From... dialog.
9. Click Save to start the transfer.

The status of the Transfer is indicated in the Transfer Status window.