Sending a Panel File To a NetLinx Master

1. Select Transfer > Send To Panel.

NOTE: Use the Send File To Panel option to send a project f ile without having to open it in TPD5.

1. If you are not already connected to the Master, the Connect dialog is invoked.
   1. Select the appropriate connection configuration from the Connection drop-down list
   2. Click Connect to establish the connection.
2. Once communication is established, select Transfer > Send to Panel. This opens the Send to Panel dialog (FIG. 418):

FIG. 418 Send To Panel dialog

1. Select one or more target panels to include in the transfer.

2. Under Options, select transfer options as desired:

3. Smart transfer (updated panel f iles only): The Smart Transfer feature reduces the transfer time by only replacing those panel files that have been updated (relative to the files already loaded in the panel). Any bitmaps, sound files and fonts that all already resident on the target panel, or in your panel file on your PC (for uploads) are not included in the transfer. By default, Smart Transfer is enabled.

4. Normal transfer (all panel f iles): This option sends all panel files.

5. Clear from status queue when complete: This option clears this transfer from the Transfer Status window when the transfer is complete. By default, this feature is enabled.

6. Click Send.

The status of the transfer is indicated in the Transfer Status window.